SoftPlan Architectural Design Software
    Copyright (c) 1985-1997 by SoftPlan Systems Inc.  All Rights Reserved
=============================================================================

                             SoftPlan Systems Inc.
                         214 Overlook Court, Suite 220
                             Brentwood,  Tennessee
                                     37027

                   Phone: (800) 248-0164, 8:30-4:30 Central
                          (615) 370-1121, 8:30-4:30 Central
                     Fax: (615) 370-1204, 24 Hours

                Web Site: http://www.softplan.com
                  E-mail: sales@softplan.com


                             Technical Support:
                             ------------------
                   Phone: (519) 886-9750, 9:00-5:00 Eastern
                     Fax: (519) 886-6955, 24 Hours

                     BBS: (519) 886-6744, 24 Hours (14400 8/N/1)
                  E-mail: softplan@hookup.net


The SoftPlan Patch:
===================

The SoftPlan patch is a self running program available in both a DOS and
a Windows version.  It is incremental, which means that you must have run
the number 1 patch before you can run the number 2 patch before you can
run the number 3 patch, etc..


To install the SoftPlan patch:
------------------------------

Copy the patch file to your SoftPlan directory.


If installing from the DOS command line:
----------------------------------------

Change to your SoftPlan directory by typing CD \SOFTPLAN.  Type DnnnPTCH.EXE
where "nnn" is the patch version number.  The patch process will begin.


If installing from Windows 3.x:
-------------------------------

From Program Manager select FILE, and then RUN.  In the Command Prompt
window type C:\SOFTPLAN\WnnnPTCH.EXE where "C" is the drive on which
SoftPlan is installed and "nnn" is the patch version number.  The patch
process will begin.


If installing from Windows95:
-----------------------------

From the Task Bar, click on the Start button.  On the Start menu click
on RUN.  In the Open window type C:\SOFTPLAN\WnnnPTCH.EXE where "C" is
the drive on which SoftPlan is installed and "nnn" is the patch version
number and then click on the OK button.  The patch process will begin.


Windows and Windows95 are trademarks or registered trademarks of Microsoft
Corporation and are used here for identification purposes only.

- end of file -