SoftPlan Architectural Design Software Copyright (c) 1985-1997 by SoftPlan Systems Inc. All Rights Reserved ============================================================================= SoftPlan Systems Inc. 214 Overlook Court, Suite 220 Brentwood, Tennessee 37027 Phone: (800) 248-0164, 8:30-4:30 Central (615) 370-1121, 8:30-4:30 Central Fax: (615) 370-1204, 24 Hours Web Site: http://www.softplan.com E-mail: sales@softplan.com Technical Support: ------------------ Phone: (519) 886-9750, 9:00-5:00 Eastern Fax: (519) 886-6955, 24 Hours BBS: (519) 886-6744, 24 Hours (8/N/1) E-mail: softplan@hookup.net ************************************************************************* * * * The SoftPlan version 9.1.1 patch is a TWO PART patch. Both the * * number ONE and number TWO patch files must be installed in order * * to fully update SoftPlan version 9.1.0 to version 9.1.1 . * * * ************************************************************************* The SoftPlan Patch: =================== The SoftPlan patch is a self running program available in both a DOS and a Windows version. To install the SoftPlan patches: -------------------------------- Copy the patch files to your SoftPlan directory. If installing from the DOS command line: ---------------------------------------- Change to your SoftPlan directory by typing CD \SOFTPLAN. Type D911PONE (or D911PTWO). The patch process will begin. If installing from Windows 3.x: ------------------------------- From Program Manager select FILE, and then RUN. In the Command Prompt window type C:\SOFTPLAN\W911PONE.EXE (or C:\SOFTPLAN\W911PTWO.EXE) where "C" is the Drive and "SOFTPLAN" the directory where SoftPlan is installed. The patch process will begin. If installing from Windows95: ----------------------------- From the Task Bar, click on the Start button. On the Start menu click on RUN. In the Open window type C:\SOFTPLAN\W911PONE.EXE (or C:\SOFTPLAN\W911PTWO.EXE) where "C" is the Drive and "SOFTPLAN" the directory where SoftPlan is installed and then click on the OK button. The patch process will begin. ************************************************************************* * * * IMPORTANT NOTE IF RUNNING SOFTPLAN VERSION 9.1.1 FROM WINDOWS: * * -------------------------------------------------------------- * * * * After the W911PONE and W911PTWO patches have been installed, you must * * run the KINSTALL.EXE program found in your SOFTPLAN directory to * * complete the version 9.1.1 update. * * * * It is not necessary to run this program if you are running SoftPlan * * from DOS. * * * ************************************************************************* Windows and Windows95 are trademarks or registered trademarks of Microsoft Corporation and are used here for identification purposes only. - end of file -